Older homes carry older wiring, and Jefferson Township has plenty of both. A house built before the era of modern electrical codes was wired for a fraction of the load those standards now account for: a few circuits, a handful of outlets, and no expectation that every room would eventually run multiple screens, appliances, and charging points at once. The electrical system that was adequate when the house was built is often the first thing that needs attention when a homeowner adds a major appliance, finishes a basement, or simply notices that something in the walls is not behaving the way it should.
We handle residential and commercial electrical work across Jefferson Township and the surrounding Franklin County area. Whether it is a tripped breaker that will not stay reset, a panel that was never upgraded past its original capacity, or a full rewire of a property that has grown through multiple additions, the job gets scoped on the call before anything is scheduled.
Call (380) 289-2878 for a quote and we will tell you what the work involves before anything is booked.
A town this size carries a range of property types, and the electrical work reflects that. Homes built over several different eras sit alongside each other, each with its own wiring history. Some have been updated room by room as owners made improvements. Others are largely original, with panels and circuits that have never been touched since the house was first occupied. Both types generate calls, and the approach to each is different.
The most common lighting calls involve replacing fixtures that no longer work, adding recessed lighting to rooms that were built without it, or converting older overhead fixtures to LED. Recessed lighting in a kitchen or living room changes how a space feels and how it functions. We run the circuit, cut the housings, and wire the fixtures to the switch location the homeowner wants. Where a dimmer is going in, the circuit and the fixture both have to be compatible, and we confirm that before the work starts.
Kitchens, bathrooms, garages, and exterior outlets are all required to have GFCI protection under current code, and many older homes in this area still have standard outlets in those locations. An AFCI breaker protects bedroom and living-area circuits against arc faults, which are a leading cause of house fires in older wiring systems. Both are straightforward upgrades, and both are worth scheduling as standalone jobs if the home has not had them installed.
A service upgrade means increasing the amperage coming into the home, typically from 100 amps to 200, which is what most modern homes need to run their full electrical load without nuisance tripping. A panel replacement addresses the breaker box itself, which may be worn, undersized, or a recalled model that should have been replaced years ago. Sometimes both happen at once. Sometimes only one is needed. The load calculation on the call helps us tell the difference before we schedule the visit.
Dead outlets, switches that stopped responding, and receptacles that have never been grounded are all common in homes that have not had recent electrical work. We replace outlets, add new locations where the existing layout does not serve the room, and install USB receptacles or specialty outlets for appliances that need a dedicated configuration. Exterior outlets on older homes are often unprotected and ungrounded, and bringing those up to current standards is a one-visit job.
Battery-operated alarms are better than nothing, but hardwired alarms with battery backup are what current code requires in most residential applications. We install hardwired smoke and carbon monoxide detectors, interconnect them so that one alarm triggers all of them, and confirm the circuit is correct for the load. Rental properties and homes that have recently changed hands are the most common situations where this comes up, because a new owner or a new tenant often prompts the first real look at what is actually installed.
A quote starts with what you describe on the call. For straightforward jobs, that conversation is enough to give you a rate before we schedule anything. For jobs where the fault has to be traced or the existing wiring has to be assessed before the scope is clear, the diagnostic visit is the first step, and the rate for that is confirmed before we come out.
What moves a quote is what the job actually turns out to involve. The fault location, what has to be opened up to reach it, whether the existing panel has capacity for the change, and what the wiring behind the wall looks like once it is visible. A load calculation on a panel upgrade, for example, depends on what the home is actually drawing and what it needs to draw. We do not settle that on assumptions.
You get the rate before anything is scheduled. If the scope changes once we are on site, that is a conversation before the work continues. Ask what the job covers when you call and you will get a straight answer.
A house of a certain age in this area may have wiring that was correct when it was installed but does not meet the standard the next inspection expects. The two types that come up most often are knob-and-tube and aluminum branch-circuit wiring.
Knob-and-tube has no ground conductor. It was designed for a load that no modern home comes close to running, and it was never intended to be buried under insulation, which is what happens in most attics over time. Where it is still active, it is a concern. Where it has already been de-energized and replaced in the branch circuits, leaving the old conductors in place is usually fine. We assess what is live, what is not, and what the replacement scope actually needs to be.
Aluminum branch-circuit wiring was common in homes built during a period when copper prices made it an attractive alternative. The problem is not the wire itself but the connections. Aluminum expands and contracts differently than copper, and connections that were made with copper-rated devices loosen over time. Remediation means going through every connection point and either replacing the device with one rated for aluminum or using an approved method to transition to copper at the device. We identify which approach suits the home and explain the options before the work starts. There is more on the services page covering electrical work.
Scheduling a service call is simple, and we work around the realities of a household or a business that cannot go dark for a day. We are available every day from 6:30 AM to 9:00 PM. When you call, a real person answers. That person knows the trade, can scope most jobs accurately on the call, and will confirm what the schedule can accommodate before you commit to anything.
For problems that will not keep, short-notice calls are taken when the schedule allows. A partial power loss, a panel fault, or an outlet that is sparking are not situations to put off, and we treat them accordingly.
Call (380) 289-2878 and describe what is happening, and we will tell you what we can do.
For tenants and businesses that need to stay operational, we talk through the scope on the call and confirm what the visit will and will not disrupt. Some jobs can be staged. Others are straightforward enough that the interruption is brief. Either way, you know what to expect before we arrive.
Not every power issue is on the property side of the meter. A partial outage, a flickering that affects the whole street, or a loss of power that the panel shows no fault for can point to the utility's equipment rather than anything inside the home.
The meter base and the service entrance are the boundary. Everything from the meter base into the home is the property owner's responsibility. Everything from the meter base back to the utility's line is theirs. When we arrive and the evidence points to the utility side, we confirm that for you, explain what we found, and tell you what to report to the utility and how. If the fault turns out to be on the property side after all, we trace it from the panel out and give you a rate for the repair before the work starts.
We cover Jefferson Township and the surrounding communities throughout Franklin County. That includes Gahanna, Pataskala, Reynoldsburg, New Albany, and Jersey Township. Residential and commercial calls are both welcome, and the work is the same regardless of which side of a township line the property sits on.
You schedule it. We power it. Simple as that.
We map the panel as part of the diagnostic or scoping visit. That involves testing each breaker against the circuits it feeds and confirming what is actually connected. Correct labeling is part of leaving the panel in a condition that makes future work and emergencies easier to manage.
Additions and renovations done at different times often mean different wiring methods in different parts of the house, and sometimes the documentation does not exist. We assess what is there before the scope is set, trace the circuits that are relevant to the job, and explain what we find. If remediation or additional work is needed beyond the original call, that is a conversation before anything proceeds.
We schedule commercial work around the calendar the business gives us. If the work needs to happen outside normal business hours or on a specific day of the week, we confirm what the schedule allows when you call. We do not guarantee a specific time slot, but we work with the constraints you describe.
Permit requirements for exterior electrical work depend on the scope of the job and whether it involves new circuits or changes to the service. We confirm what applies to your property when we scope the visit and handle what is needed. You are told before the work starts whether a permit is part of the job.
We confirm the continuation plan before we leave at the end of the first day. Power is restored to any circuits that are safe to re-energize overnight, and the scope and timeline for the following day are confirmed before we go.
Let us know when you call and we will work out access before the visit is scheduled. In shared buildings, that sometimes means coordinating with a property manager or building superintendent to confirm the panel is reachable before we arrive.
Any outlet near a water feature requires GFCI protection and a weatherproof cover rated for wet locations. Outlets within a certain distance of the water also require specific placement and circuit protection. We confirm what applies to your installation when we scope the job.
We identify which circuits the home office equipment runs on and plan the shutdown to avoid those where possible. If the office circuit does need to come down, we confirm the window in advance so you can save work and power down equipment properly.
We answer the phone, we show up, and we explain what we find before any work begins. That is the whole of it.
Call (380) 289-2878 to get a quote for any electrical job in Jefferson Township or the surrounding Franklin County area. We are available every day from 6:30 AM to 9:00 PM.
One number. One call. One electrician at your door.
Electrical work also reaches these towns: Gahanna, Pataskala, Whitehall, Etna Township, Westerville.
See the whole of our coverage area list.
Most electrical problems in Jefferson Township, Franklin County show up as a symptom first: a breaker that won't stay reset, an outlet that stopped working, lights that flicker when the heat kicks on. The table below maps out the work we handle, who each service fits best, and what is practical to know before you call. If you have questions about a specific job, the rate and the scope are both confirmed on the phone before anything is scheduled.
| Service | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Whole-Home Surge Protection |
| Jefferson Township, Franklin County homes exposed to regular thunderstorm activity and utility switching events | A power strip handles one outlet. A panel-level protector covers every circuit in the building at once. |
| Electrical Panel & Service Upgrades |
| Homes with a 100-amp panel, frequent tripping, or plans to add an EV charger or major appliance | A panel sized for a 1970s home was not designed for today's electrical load. A service upgrade removes the capacity constraint and gives the home room to grow. |
| Wiring for Additions & Remodels |
| Homeowners adding a room, converting a garage, or building a home office | Electrical planning at the start of a remodel avoids the cost of opening finished walls later. We scope the load before the first wire is pulled. |
Call (380) 289-2878 to describe your job, get the rate, and find out what the schedule allows.
(380) 289-2878