Homes in Etna Township run the full range of electrical situations. A newer build on the east side of Licking County might need a panel that can carry an EV charger and a whole-home surge protector. An older house on the same street might still have the original wiring, a 100-amp service that was never upgraded, and outlets that predate GFCI requirements by decades. The work looks different depending on what is already in the walls, and getting it right starts with understanding what is there. That is what we do, and it is what we bring to every call in this area.
Commercial properties and rental units add another layer. A small business that cannot shut down for a full day needs electrical work scoped and scheduled around the operation, not the other way around. A landlord preparing a unit for a new tenant needs the wiring confirmed and the panel labeled before the walk-through. We handle all of it, and the call to scope the job costs nothing.
Scheduling a service call is simple, and most jobs get on the calendar without a long wait.
Call (380) 289-2878 during our hours, 6:30 AM to 9:00 PM every day, describe what is happening, and we scope the job on the phone.
The rate is confirmed before anything is booked. You know what the visit covers before we arrive.
Some electrical problems will not keep. A breaker that will not reset, a burning smell near an outlet, a portion of the home that has gone dark with the utility line still live, a panel that is making noise it should not make. Those calls go to the front of the schedule. We take short-notice work when the schedule allows, and the sooner you call, the sooner the power is back on.
For tenants and businesses that need to stay open, we work around what the property requires. That means scoping the job to minimize the time circuits are off, confirming the order of work on the call, and finishing what we start before we leave.
This area has every kind of panel and circuit in it, and matching replacement parts to what is already in a property is one of the more practical challenges in this work. A breaker panel from the 1970s takes a specific breaker type. Some manufacturers stopped making them. Some panels have been discontinued entirely, and the replacement breakers that fit them are not always available at a local supply house.
When a part has to be ordered, we tell you that on the call or during the diagnostic visit, not after the work has started. We explain what is needed, how long it is likely to take, and whether a temporary measure makes sense while the order comes in. The scope and the timeline are confirmed before anything is committed.
An obsolete panel is not just a parts problem. Certain panels from earlier eras have documented failure modes that make replacement the right answer regardless of whether a breaker is available. We identify those during a diagnostic visit and explain the options clearly. Where a panel replacement is the right call, we scope the full job, including the service entrance and the load calculation, before quoting.
Older homes sometimes have conduit sizes, box depths, or wiring gauge combinations that do not match modern fittings off the shelf. We account for that during the visit rather than discovering it mid-job. When a fitting has to be sourced or adapted, that is part of the scope we confirm with you before the work proceeds.
When a job is finished, the property should be in better shape than when we arrived, and the documentation should reflect that. Every circuit we work on gets tested under load. GFCI and AFCI protection is verified before the panel is closed. Outlets are confirmed live and grounded correctly.
Panel labeling matters more than most people realize until they need it. A panel with every circuit correctly identified makes a future repair faster, a home inspection cleaner, and a sale or rental transition simpler. Where we work on a panel, we confirm the labeling is accurate and legible before we leave.
For larger jobs, including whole-home rewiring, panel replacements, and service-entrance upgrades, we provide written documentation of what was done. That record matters when the property changes hands, when a permit requires a final inspection, or when an insurance company asks what work was performed and when. If the scope is still open, our list of electrical services is the place to start.
The housing mix in Etna Township produces a specific set of electrical needs. Newer construction, older homes that have been added onto over the years, properties with outbuildings, and commercial units all generate different calls. The job types below come up regularly in this area, and each one requires a different approach.
Homes built during certain decades used aluminum for branch-circuit wiring rather than copper. Aluminum expands and contracts differently from copper, and over time the connections at outlets, switches, and fixtures can loosen in ways that create heat and arcing. The fix is not replacing every wire in the house. It involves treating each connection point with the correct method, either with compatible devices rated for aluminum, with approved connectors, or with a pigtail approach that transitions to copper at the device. We assess what is there and explain the options before any work starts.
A panel without accurate labeling is a liability during a repair and a problem during an inspection. We trace each circuit, confirm what it feeds, and label the panel clearly. For a property being prepared for sale or a new tenant, this is often scheduled alongside a safety inspection. It is also a practical first step before adding circuits, because it confirms what capacity is actually available.
The region sees severe thunderstorms, ice events, and the occasional extended outage that makes backup power more than a convenience. On the electrical side, a generator installation means the transfer switch, the generator circuit, and the connection to the panel. The transfer switch is what makes the installation safe. It isolates the home from the utility line so the generator cannot back-feed the grid. We handle the full electrical side of the hookup and confirm the wiring and grounding are correct before the generator is tested under load.
Recessed lighting, ceiling fan circuits, under-cabinet lighting, dimmer switches, and fixture replacements are all straightforward jobs when the circuit is already there and more involved when it is not. We run new circuits where needed, confirm the box is rated for the fixture weight, and wire everything to the load the fixture requires. Ceiling fans that need a new circuit rather than a simple swap are a common call, and we scope that on the phone.
Properties in Licking County outside the municipal water service often run a well pump, and that pump needs a dedicated circuit sized for its starting load, not just its running load. A pump that shares a circuit or runs on an undersized breaker will nuisance-trip and can damage the pump motor over time. We size the circuit correctly, run it from the panel, and confirm the grounding is solid. Irrigation systems with their own electrical demand get the same treatment.
The rate for a job is confirmed on the call before anything is scheduled. What moves a quote is the actual scope: what the fault turns out to be, what has to be opened up to reach it, whether the existing panel has capacity for the change, and whether the wiring behind the wall is what it appears to be from the outside.
A simple outlet replacement and a whole-home rewiring are not quoted the same way, and they should not be. For smaller repairs, the diagnostic visit confirms the fault and the fix, and the rate covers both. For larger projects, the scope is built on the call and confirmed in person before work begins. With a local company, a question about the work gets a straight answer.
Call (380) 289-2878 and describe what you are dealing with.
We will tell you what the job involves and what it costs before anything is booked.
We handle electrical work across Etna Township and the surrounding Licking County communities. That includes Pataskala, Kirkersville, Harrison Township, Beechwood Trails, and Reynoldsburg. Residential calls, rental properties, and commercial work are all welcome. We are available every day from 6:30 AM to 9:00 PM.
An inspector may note a condition that is not currently required to be corrected under the rules that apply to the property. That does not mean the condition is harmless. We explain what the finding involves so you can decide whether to address it now or monitor it.
Permit requirements for panel replacements and service upgrades vary depending on the property type and where it sits within the township. When we scope the job, we confirm what applies at your address and handle what the process requires. The work is done to the standard a final inspection expects, and we do not skip the steps that make it pass review.
You are. We stop when the scope changes, explain what we found, and confirm the new scope and rate before any additional work begins. Nothing beyond what you authorized proceeds without a conversation first.
Running new wiring through finished walls requires opening them at certain points. We work to minimize the number of cuts, but the openings that are made will need patching and repainting. We do not do drywall or painting work, and we confirm that expectation when we scope the job.
We look at the number of open breaker slots, the total amperage the panel is rated for, and the actual load already being drawn. A panel can appear to have open slots but still be at or near its rated capacity. We do that assessment before committing to adding a circuit.
Note whether the pump is tripping its breaker, running slowly, or failing to start at all. If the panel has a dedicated breaker for the pump, check whether it has tripped or whether the breaker feels warm. Write down the pump's nameplate amperage if you can read it. That information helps us scope the circuit and the panel capacity on the call before we schedule the visit.
If the planned route is blocked by a driveway, a root system, or another obstruction, we scope an alternative path on the call or during the visit. Options depend on the site, and we explain the trade-offs of each route before any digging starts.
It depends on the condition, the method used, and whether it meets the requirements for the new application. We assess existing outdoor wiring the same way we assess anything else: if it is correct and safe for the purpose, it can be incorporated. If it is not, we explain what needs to change.
If you are in Etna Township, Pataskala, Kirkersville, or anywhere else in this part of Licking County and need electrical work done, we are the call to make.
Call (380) 289-2878 for a quote. You schedule it. We power it. Simple as that.
We take electrical work in these nearby communities as well: Pataskala, Pickerington, Jefferson Township, Whitehall, Gahanna, Newark, Lancaster.
The rest are on our coverage area list.
Most electrical problems in Etna Township show up as a symptom first: a breaker that won't stay reset, an outlet that stopped working, lights that flicker when the heat kicks on. The table below maps out the work we handle, who each service fits best, and what is practical to know before you call. If you have questions about a specific job, the rate and the scope are both confirmed on the phone before anything is scheduled.
| Service | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Backup Generator Installation |
| Homeowners who need reliable power through Ohio ice storms and wind events | The transfer switch isolates the home from the utility line so the generator runs safely without back-feeding the grid. It is required for a legal hookup. |
| Dedicated Appliance Circuits |
| Homeowners adding a major appliance, finishing a basement, or building out a workshop | Sump pump circuits are a practical need in this part of Ohio. We size and run them so the pump has reliable power when it is needed most. |
| Electrical Panel & Service Upgrades |
| Homes with a 100-amp panel, frequent tripping, or plans to add an EV charger or major appliance | A panel sized for a 1970s home was not designed for today's electrical load. A service upgrade removes the capacity constraint and gives the home room to grow. |
Call (380) 289-2878 to describe your job, get the rate, and find out what the schedule allows.
(380) 289-2878